Product features:
Cycloid reducer is a kind of hard tooth reducer with advanced design and novel structure, which applies the principle of star transmission and adopts cycloid pin tooth messing. The reducer can be widely used in various transmission mechanisms in the deceleration mechanism, such as: lifting, transportation, metallurgy, mining, environmental protection, petrochemical, textile, printing and dyeing, food, light industry, pharmaceutical, rubber, packaging, plastic, beer, road construction, grain and oil and other mechanical transmission.
1, the transmission ratio is large: the transmission ratio is 1/6~1/87 when the first deceleration; The transmission ratio is 1/99~1/7569 when the two-stage deceleration occurs. More multistage combinations can be adopted as needed.
2. High transmission efficiency: due to the rolling engagement of the mechanical meshing parts, the transmission efficiency can reach more than 92% at the first level and 88% at the second level.
3, small volume, light weight: because not only adopts the principle of planetary transmission, the input shaft and output shaft in the same axis, and has a direct connection with the motor is one of the unique, so this machine has the characteristics of compact structure, small volume, light weight.
4. Less failures and long service life: the main transmission meshing parts of this machine are made of bearing steel, so the mechanical properties are good, wear resistance is good, plus the use of rolling friction, supplemented by high-quality lubricating grease, so that it has fewer failures and long service life.
5, reliable operation balance: the machine transmission process for multi-tooth meshing at most for 67%, so make it stable and reliable operation, low noise, strong overload resistance.
6. Convenient disassembly and easy maintenance: simple disassembly and easy maintenance due to reasonable structural design.
7. The machine also has the characteristics of impact resistance, small inertia torque, suitable for frequent starting and positive and negative rotation.
Product structure:
The whole transmission device of cycloid reducer can be divided into three parts: the input part; Deceleration part; The output part.
Direct connection type reducer can be assembled with Y series special motor and Y series derived special motor, such as Y series motor, YB explosion-proof motor, YEJ brake motor, etc. With various types of standard motor and all kinds of power supply at the same time, through the flange connection, such as: NEMA, IEC series, Y series |, YA series, YB series, serve to connect YEJ series, such as various types of motor and pump connection.
WeChat official account
